Atlas Geoflex Express highly flexible rapid set gel adhesive 2-15 mm.

The main characteristics

  • foot traffic and grouting just after 2 hours
  • for installation of ceramic and natural stone tiles, porcelain-gres and mosaic
  • for application in communication routes, bathrooms, balcony and terraces
  • perfect spread and no slip even with large tiles
  • for critical substrates e.g. old tiles, terrazzo, plasterboards, damp-proofing, floor heating, concrete and OSB
  • wide range of mix water – consistency adjusted to the needs
  • 2 up to 15 mm layer – for floating, thin- and thick-coat application
  • application in temperatures from +5°C up to +35°C


Rapid setting – use of rapid setting cement in the adhesive formula allows for rapid increase of adhesion and strength, especially during the initial setting (first 2-3 hours after tiles installation). This ability enables to foot traffic and grouting just after 2 hours after tiles installation. The adhesive is recommended also for quick repairs of the floor (e.g. on balcony, terrace etc.)

The main parameters

  • Mixing ratio (water/dry mix): 0,24 ÷ 0,30 l / 1 kg, 6,0 ÷ 7,5 l / 25 kg
  • Min./max. adhesive thickness: 2 mm ÷ 15 mm
  • Open time: min. 20 minutes
  • Adjustability time: 10 minutes
  • Floor access: after 2 h
  • Grouting: after 2 h
  • Full operation load – foot traffic: after 2-6 hours
  • Full operation load – vehicle traffic: po 24 h
  • Floor heating: after 7 days


Related Products