ATLAS PLASTER MORTAR 25KG

Key features:

for plastering walls made of ceramic bricks, silicate bricks, cellular concrete, concrete blocks

increased adhesion to the substrate

plastic, easy to process

layer thickness 6-30 mm

for manual plastering of walls and ceilings

Description:

Forms a two-layer plaster cat 0-III - the plaster consists of two layers: "preliminary roughing" and "top coat" (additionally, a filler layer of ATLAS REKORD cementitious filling mortar can be made on it).
It is suitable for manual or mechanical plastering.
Types of plastered substrates - ceilings and walls made of bricks, blocks, hollow bricks and other such ceramic or silicate materials, surfaces made of concrete, aerated concrete, chipboard, cement and cement-lime plaster.

Main properties:

high strength: category CS II (1.5 ÷ 5.0 N/mm²)

so called anti-freezing agents may be added to the mortar, allowing works to be carried out at lower temperatures, i.e. below +5°C - the new temperature range for the mortar, its preparation method (in particular the correction of the amount of water added), the rules for carrying out works and the conditions for setting the mortar should be adopted in accordance with the additive manufacturer's indications. The amount of anti-freezing agent added depends on the cement content in the mortar - the cement/filler ratio in ATLAS ZA-PRAJA TYNKARSKA is 1:4 Note. The mortar manufacturer is not responsible for the effects and quality of the anti-frost additives used.

ATLAS ZAPRAWA TYNKARSKA is produced as a dry mixture of the highest quality cement binder, quartz fillers and additives

Layer thickness: 6-30 mm

Consumption: one 25 kg package can be used to make approx. 1.3-1.4 m2 of 10 mm thick plaster.