KNAUF GOLDBAND GYPSUM PLASTER 5kg
Knauf Goldband is a pre-prepared dry gypsum plaster designed to create smooth surfaces of any structure on walls and ceilings inside the buildings; used manually as a single layer gypsum plaster on all kinds of substrates. An easy to handle mineral product.
CHARACTERISTICS
- Mineral product,
 - Easy to handle in all stages of the work,
 - Suitable for manual plastering,
 - Flexible,
 - High-performance,
 - Single-layer plaster,
 - Long processing time,
 - Uniform hardening,
 - Resistant to impact and pressure,
 - Regulates humidity and is vapor permeable,
 - Allows walls to breathe,
 - Creates a pleasant and healthy climate in rooms,
 - Meets fire protection requirements,
 - Can be applied up to 50 mm thickness.
 
APPLICATION
- To create smooth surfaces, of any substrate or damaged walls and ceilings,
 - As a one layer plaster for all types substrates,
 - In kitchens and bathrooms ordinary use (e.g. toilets in schools and bathrooms in hotels, hospitals, etc.) where max. humidity is < 70%,
 - As a substrate for all types of paints and wallpaper,
 - As a substrate for tiling,
 - As a substrate for finishing plasters.
 
INSTALLATION
- Substrate should be bushed clean and primed. Mix the bag with water (approx. 20 liters) without any additives until you achieve the correct mortar consistency.
 - Mix thoroughly with clean water water and do not use any additives. Equipment and tools should be cleaned after use immediately with clean water.
 - Apply the material to the substrate evenly with a spatula vertically and horizontally. Once the binding starts, align the inner corners with trapezoid spatula.
 - The average plaster thickness is 15 mm, the minimum thickness being 8 mm. In special cases on the walls You can apply plaster thickness up to 50 mm.
 - To allow quick drying of the plaster, ensure proper ventilation.
 - Should not be used when room temperature below +5C.
 - Fresh plaster must be protected from frost.
 
CERTIFICATION
- Tested according to EN 13279-1
 - Carries CE mark